General characteristics

  • Made-to-measure for the customer
  • With forced recirculation of air
  • Automatic regulation of temperature.
  • Eléctricas, a gas, gasoil o vapor
  • Highest temperature: 450ºC
  • Loading on metallic conveyor belt of teflon fiber or conveyor chains
  • Possible incorporation of many accessories: time and temperature programmers, cycle timers, temperature recorders (paper, data connection, USB…) gas extractors, with/without servomotor, with explosion-proof or flameproof systems, safety barriers, stoppers, detectors, etc.
  • Uses

  • Damp dry of metal and plastic parts
  • Varnish drying through transformers
  • Polymerized of resins, plastic, car brakes…
  • Cured silicone to remove peroxides in printed circuits
  • Cured paint over parts
  • To dilate bushings, moulds, shoe soles…
  • Heating of aluminium cylinder heads
  • Shrink wrap
  • Examples

    Continuous propane gas-burning furnace to cure gaskets of metal lids up to 240ºC, with a final cooling chamber and a special panelled conveyor.

    Continuous electric furnace for damp drying on electronic parts up to 180ºC with a conveyor belt of teflon fiber.

    Continuous gas-burning furnace for drying metal drums up to 150ºC with a special magnetic conveyor.

    Continuous gas-burning furnace to cure gaskets of small metal lids up to 240ºC, with a final cooling chamber and a conveyor equipped with a metal mesh.

    Continuous electric furnace to cure resin over plates up to 375ºC, with a final cooling chamber and a conveyor belt fitted with a mesh

    Continuous electric furnace to cure silicone over electronic parts up to 90ºC, adapted to the conveyor of the customer's production line.

    Electric furnace to seal the gaskets of the drums up to 180ºC, the continuous conveyor of the customer is placed in parallel

    Continuous gas-burning furnace to liquefy the content of the drums up to 240ºC, with a final cooling chamber and a special conveyor placed on the painting line.

    Continuous electric furnace to cure silkscreen over pistons up to 230ºC, with a final cooling chamber and a conveyor belt fitted with a mesh.